Wide frequency response range, suitable for early anomaly detection
Accurately detects and analyzes motor operating conditions
Ultra-low power consumption powered by a large 19Ah battery
Upgraded intelligent alarm algorithms for comprehensive monitoring
Dimension of sensor for bolt installation
Dimension of sensor for magnet+glue installation
| Parameters | Specification | Remark |
|---|---|---|
| Physical | ||
| Dimension | 46.5mm × 110.3mm | Diameter × Height |
| Weight | About 330g | |
| Casting Material | Main body: PA66 (nylon) + 30% glass Fiber Pedestal: 316L Stainless Steel |
|
| Installation Method | Magnet + glue installation, bolt installation | |
| Ambient Temperature | -40°C to +70°C | |
| Protection Grade | IP68 | |
| Basic | ||
| Range | Piezoelectric: ±50g peak MEMS: ±16g peak |
|
| Frequency Response (±3dB) | Piezoelectric (Z-axis): 2Hz to 20kHz MEMS (X,Y-axis): 0.1Hz to 1kHz |
|
| Analysis Frequency | Piezoelectric: 1kHz, 2kHz, 5kHz, 10kHz, 20kHz MEMS direction: 1kHz |
|
|
Measuring Definition Sampling Length |
Piezoelectric: 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K MEMS: 1K, 2K, 4K, 8K, 16K |
|
| Spectral Line | 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 102400 | Calculated by NOVASEER software |
| Maximum Acquisition Length | 2M | |
| Edge Computing | Yes | |
| Indicator Alarm | Yes | |
| Temperature Measuring Range | -40°C to +125°C | Normally the temperature measuring range is -40°C to +70°C. When bearing temperature rises rapidly, it can support +70°C to +125°C Short time measurement |
| Temperature Resolution | 0.1°C | |
| RPM Recognition | Model: RW606M | Speed (optional) |
| Power | ||
| Power Supply | 2.5 to 3.9 VDC battery powered | |
| Battery | 19Ah Lithium-thionyl chloride battery | |
| Communication | ||
| Communication with Data Collector | ZigBee | IEEE 802.15.4 |
| Others | ||
| Certification | CE, FCC, KC, UKCA, NCC, ATEX, IECEx | |
| Identification | Ex ia IIC T4 Ga | Can be used for Zone 0, Zone 1, and Zone 2 |
Join our risk free trial and deploy 100 smart sensors across your operations for 100 days to see real results — before making any commitment